Vibrating plate  is mainly suitable for the bonding between tamping particles and materials with less friction, such as river sand, gravel and asphalt. The main working parameters of the vibrating plate are: the bottom area of ​​the working plate, the mass of the whole machine, the exciting force and the excitation frequency. Under normal circumstances, the floor area of ​​the same type of flat plate is similar, so the performance of the flat impact cymbal is mainly affected by the quality of the whole machine, the exciting force and the excitation frequency. The exciting force is mainly used to maintain the forced vibration of the material to be compacted; and the excitation frequency affects the compaction efficiency and the degree of compaction. That is, under the same exciting force, the higher the excitation frequency, the higher the compaction efficiency and compactness. high.

The vibrating plate all maintains a certain jump height when the work jumps, generally between 0.4 and 0.8 mm. When the vibrating plate 达到 reaches the same exciting force, the higher the operating frequency of the plate cymbal, the smaller the required vibration quality, and the lighter the overall quality. However, since most flatbeds use a gasoline engine as a power source, and a gasoline engine can withstand limited vibration, the higher the operating frequency, the higher the vibration isolation requirement, and the higher the technical requirements for each component.